THK SHS65C1SSC1 BLOCK
The flange of the LM block has tapped holes. It can be mounted from the top or the bottom. It can be used in places where the table cannot have through holes for mounting bolts.
Description
When using two units of LM Guide facing each other, the previous model required much time in machining the table and had difficulty achieving the desired accuracy and adjusting the clearance. Since model HSR-YR has tapped holes on the side of the LM block, a simpler structure is gained and significant man-hour cutting and accuracy increase can be achieved.
The technical data for THK SHS65C1SSC1 BLOCK
| Part Number | SHS65C1SSC1 BLOCK | |
| Rolling Element | Balls | |
| Block Type | C | |
| Overall(mm) | Height M | 90 |
| Width W | 170 | |
| Length L | 221 | |
| Block(mm) | B | 142 |
| C | 110 | |
| S | M16 | |
| H | 14.5 | |
| Rail(mm) | Pitch F | 150 |
| d1xd2xh | 18x26x22 | |
| Basic load rating(Radial) | Dynamic C (kN) | 205 |
| Static C0 (kN) | 320 | |
| Preload | Light Preload | |
| Seals | end seals + side seals + inner seals |
As a professional Linear Motion Guide supplier, we are mainly responsible for the global sales and technical services of THK products. Our warehouses are located in HongKong and ShenZhen City, it is very convenient for demands of global market . Because there are many types of THK products, we can not upload all of them at present. If you have any demand, you can directly contact us.
