Our goal is to exceed our customers' expectation in providing quality products

Google+
LinkedIn
Pinterest

+86-177-4621-9784
admin@wsbearing.com

SKF Pillow block ball bearing unit SKF FYWK 20 YTH

Home SKF BEARING SKF Pillow block ball bearing unit SKF FYWK 20 YTH

SKF Pillow block ball bearing unit SKF FYWK 20 YTH

This square flanged ball bearing unit is particularly suitable for use in the food and beverage industry. It is resistant to chemicals, light in weight and high in strength. The unit consists of an embedded bearing with an extended inner ring and a set screw locking device for applications where the direction of rotation is fixed or alternate. The bearings are mounted in composite housings and can be bolted to the machine sidewall or frame. Ball bearing units can tolerate moderate initial misalignment, but axial displacement is generally not allowed.

  • Chemical Resistant
  • Pre-filled with non-toxic food grade grease
  • Light weight and high strength
SKF BEARING

Description

SKF FYWK 20 YTH

Meets standards
ISO and dimensional deviations
Specific applications
For food and beverage applications
Housing material
SKF food-grade composite bearings
Bearing seals
Seal and slinger rings on both sides
Bearing seal type
Contact, multiple
Sealed unit
Optional end caps
coating
No
尺寸 - FYWK 20 YTH尺寸 - FYWK 20 YTH

size

d
20 mm
 aperture
d1
≈28.2 mm
 Inner ring outer diameter
A
30 mm
 Housing width
A1
15 mm
 Clam width
A5
26 mm
 End cap protrusion
B
31 mm
 Inner ring width
B1
31 mm
 Overall width of the bearing
B4
4.5 mm
 Distance from the side of the fastener to the center of the thread
Db
59 mm
 Top outer diameter
J
63.5 mm
 The distance between the connecting bolts
L
86 mm
 Overall length
N
12.3 mm
 The diameter of the hole in the connecting bolt
s1
18.3 mm
 The distance from the side of the lockbuckle to the center of the raceway
T
37.3 mm
 Overall width

Data calculations

Basic dynamic load rating C
10.8 kN
Basic static load rating C0
6.55 kN
Fatigue load limits Pyou
0.28 kN
Limit speed
5 000 r/min
Ultimate speed at h6 shaft tolerances

Installation information

Set screws G2
M6x0.75
Hex wrench size for set screws
3 mm
Recommended set screw tightening torque
4 N·m
Recommended diameter of the connecting bolt, mm G
10 mm
Recommended diameter of the connecting bolt, inches G
0.375 in

As a professional bearing exporter and SKF distributor, WS Bearing stocks thousands kindsof ball bearing unit for sale，We can export to Singapore–Viet Nam–Malaysia–Indonesia-Germany-USA etc.we have always been committed to providing our customers with the highest quality products and the most satisfactory services. Through collaborations with top brands such as  SKF, TIMKEN, FAG, THK,and others, we have not only established a wide range of product lines but also accumulated rich industry experience and technical knowledge. If you have problems about selecting proper bearings for your special applications, please contact us right now

Inquiry Us





Related Products